YJS-520 shoe sole mold making liquid silicone rubber
Category: Shoe Sole molding Silicone  Publish Time: 2018-08-07 11:05 
YJS-525 is good for shoe sole molding products. They are widely used for manual mold making, shoes molds, plaster models, sole sampling, sand casting, etc.
1.Description
YJS-525 is good for shoe sole molding products. They are widely used for manual mold making, shoes molds, plaster models, sole sampling, sand casting, etc.

2. Technical Datasheet
Typical general characteristics
Inspection Method
Value
Product data (Catalyzed A+B)
YJS-525
Hardness
Shore A
25±2
Mix Ratio
A:B
100:2
Color
/
White
Pot life
25 °C (77F)
30-40mins
Curing time
25 °C (77F)
3-4 hours
Mixed viscosity
mPa.s
25000±1000
Tear-strength
kg/cm
25±2
Tensile-strength
M.pa
4.0±0.5
Elongation
%
450±50
Shrinkage
%
≤0.2%
Note: This is a 100A:2B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.

3. FEATURES
1.Low viscosity
2.great flexibility
3.Extra low shrinkage
4.Chemical resistance
5.release properties
6.Easy to work with
4.High tear strength
5.Heat Resistance
6.various color is available
7.High reproduction rate

4.Appearance
Part A: Silicone rubber is a white liquid
Part B: Catalyst is a non-toxic and odorless liquid, white transparent color.
ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season.

5.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-5 series Silicone Base and its Curing Agents have a usable life of 10 months.

6.Package
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle 

 



  
 
QQ  Shirley Wu
Skype