YJS-T40 transparent liquid silicone rubber for rapid prototyping
Category: Rapid Prototyping Silicone  Publish Time: 2018-08-07 10:30 
YJS-T40 is manily used for Prototype mold making for electric & electronics industry such as TVs, Home appliances, mobile phones, copy machines etc
1.Description:
YJS-T40 Silicone rubber is is a two-component, addition cure liquid silicone rubber
designed for mold making.
YJS-T40 cures at room temperature to a transparent high strength elastic rubber with the
addition of curing agents.

2.APPLICATIONS
*Prototype mold making for electric & electronics industry such as TVs, Home appliances,
mobile phones, copy machines etc
*Prototype mold making for automotive industry such as console boxes, radiator grilles,
lamp housings etc
*Mold making for all kinds of jewelry accessories

4.TYPICAL PROPERTY DATA 

Typical general characteristics

Inspection Method

Value

Product data (Catalyzed A+B)

YJS-T40

Hardness

Shore A

40±2

Mix Ratio

A:B

1:1/10:1

Color

/

transparent

Pot life

25 °C (77F)

30-40

Curing time

25 °C (77F)

3-4

Mixed viscosity

mPa.s

30000±1000

Tear-strength

kg/cm

12±2

Tensile-strength

M.pa

4.5±1.0

Elongation

%

400±50

Shrinkage

%

0.1

5.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-6 series Silicone have a usable life of 12 months.

6.Appearance
Part A: a non-toxic and odorless liquid with translucent color and platinum inside.
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.

6.Package
1kg/drum; 5kg/drum;10kg/drum; 20kg/drum;25kg/drum;200kg/drum.
 

 



  
 
QQ  Shirley Wu
Skype