Share to wechat
Edit ContentYJS-625 two component addition cure liquid silicone for polyester casting
Category: Resin casting silicone
Publish Time: 2018-08-07 10:31
YJS-625 is a two-component 1:1 Mix addition (platinum) cured RTV silicone rubber which cures at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts.
1. Description
YJS-625 is a two-component 1:1 Mix addition (platinum) cured RTV silicone rubber which cures at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts. This stuff is really thin!
YJS-625 is a two-component 1:1 Mix addition (platinum) cured RTV silicone rubber which cures at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts. This stuff is really thin!
2.Features
*high chemical resistance to the aggressive components of some types of resin
*High resistance to laceration (this characteristic guarantees high resistance to wear and tear)
*High level of accuracy in reproducing very small particulars
*High dimensional stability over time and non-deformability
*Considerable resistance to high temperatures and to ageing
*Excellent non-stick effect
*Soft, stretchy, high tear resistance,
*Will not shrink in service
PLATINUM CURE for HIGH PRECISION Jewelery; Art; Industrial & Architectural molds — Highest quality in the world. Room temp cure TIME OF ABOUT 2 Hours.
Shore hardness of 25A – Will not shrink in service.
*high chemical resistance to the aggressive components of some types of resin
*High resistance to laceration (this characteristic guarantees high resistance to wear and tear)
*High level of accuracy in reproducing very small particulars
*High dimensional stability over time and non-deformability
*Considerable resistance to high temperatures and to ageing
*Excellent non-stick effect
*Soft, stretchy, high tear resistance,
*Will not shrink in service
PLATINUM CURE for HIGH PRECISION Jewelery; Art; Industrial & Architectural molds — Highest quality in the world. Room temp cure TIME OF ABOUT 2 Hours.
Shore hardness of 25A – Will not shrink in service.
3. Common uses of YJS-625 Platinum Cure Silicone:
*Wax
*Urethane (polyurethane)
*Plaster Hydrocal, Hydrostone
*Polyester casting resin
*Low melt metals (mold life can be short)
*Cement, Concrete
*Epoxy
*Soap
*Chocolate
*Wax
*Urethane (polyurethane)
*Plaster Hydrocal, Hydrostone
*Polyester casting resin
*Low melt metals (mold life can be short)
*Cement, Concrete
*Epoxy
*Soap
*Chocolate
4.Technical datasheet
|
Typical general characteristics
|
Inspection Method
|
Value
|
|
Product data (Catalyzed A+B)
|
YJS-625
|
|
|
Hardness
|
Shore A
|
25±2
|
|
Mix Ratio
|
A:B
|
1:1/10:1
|
|
Color
|
/
|
translucent
|
|
Pot life
|
25 °C (77F)
|
30-40
|
|
Curing time
|
25 °C (77F)
|
3-4
|
|
Mixed viscosity
|
mPa.s
|
6000±1000
|
|
Tear-strength
|
kg/cm
|
22±2
|
|
Tensile-strength
|
M.pa
|
4.5±1.0
|
|
Elongation
|
%
|
500±50
|
|
Shrinkage
|
%
|
0.1
|
5.Appearance
Part A: a non-toxic and odorless liquid with translucent color and platinum inside.
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.
6.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-6 series Silicone have a usable life of 12 months.
7.Package
1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
.jpg)
Contact Us
E-mail: info@sz1j3.com
Tel: +86-0755-85200989
Mobile/WhatsApp: +86 13823512713
Skype: live:gcsilicone1
Address: No. 25, Baolong 1st Road, Nanyue Community, Baolong Street, Longgang District, Shenzhen,china
Shirley(live:gcsilicone1)