YJS-635 no deformation platinum cure rtv molding silicone rubber
Category: Grc&Gfrc Molding silicone  Publish Time: 2018-08-07 10:33 
YJS-635 is a two-component 1:1 Mix addition (platinum) cured RTV silicone rubber which cures at room temperature. YJS-635 is a harder material, with a 35A Shore hardness.
1. Description
YJS-635 is a two-component 1:1 Mix addition (platinum) cured RTV silicone rubber which cures at room temperature. YJS-635 is a harder material, with a 35A Shore hardness. YJS-635 offers tremendous versatility and are suitable for making production molds of any configuration, large or small. These silicones exhibit good chemical, abrasion and heat resistance, which are used for rapid prototyping, wax casting (foundries and candle makers), architectural restoration and for casting concrete.

2.Features
*high chemical resistance to the aggressive components of some types of resin
*High resistance to laceration (this characteristic guarantees high resistance to wear and tear)
*High level of accuracy in reproducing very small particulars
*High dimensional stability over time and non-deformability
*Considerable resistance to high temperatures and to ageing
*Excellent non-stick effect
*high tear resistance,
*Will not shrink in service

3. Common uses of YJS-635 Platinum Cure Silicone:
*Wax
*Urethane (polyurethane)
*Plaster Hydrocal, Hydrostone
*Polyester casting resin
*rapid prototyping
*Cement, Concrete
*Epoxy
*Soap

4.Technical datasheet
Typical general characteristics Inspection Method Value
Product data (Catalyzed A+B) YJS-635
Hardness Shore A 35±2
Mix Ratio A:B 1:1/10:1
Color / translucent
Pot life 25 °C (77F) 30-40
Curing time 25 °C (77F) 3-4
Mixed viscosity mPa.s 8000±1000
Tear-strength kg/cm 24±2
Tensile-strength M.pa 5.5±1.0
Elongation % 450±50
Shrinkage % 0.1

5.Appearance
Part A: a non-toxic and odorless liquid with translucent color and platinum inside.
Part B: a non-toxic and odorless liquid with translucent color.
ATT: We can do any curing time as your requirements.

6.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-6 series Silicone have a usable life of 12 months.

7.Package
1kg/drum; 5kg/drum;10kg/drum; 20kg/drum;25kg/drum;200kg/drum. 


Previous: YJS-640 two component liquid silicone rubber for GRC molding  Next: YJS-645 no shrinkage liquid silicone rubber for mold making
 
QQ  Shirley Wu
Skype