
YJS-525 liquid mould making silicone rubber for photo frame
Category: polyurethane casting silicone
Publish Time: 2018-08-07 11:08
YJS-525 are good for photo frame molding. It is medium hardness silicone with hardness Shore A 25
1.Description
YJS-525 are good for photo frame molding. It is medium hardness silicone with hardness Shore A 25. It is a kind of of two- component materials consisting of a flowable part A which when mixed with the curing agent or catalyst,cures at room temperature by a condensation reaction.
YJS-525 are good for photo frame molding. It is medium hardness silicone with hardness Shore A 25. It is a kind of of two- component materials consisting of a flowable part A which when mixed with the curing agent or catalyst,cures at room temperature by a condensation reaction.
2. Technical Datasheet
Typical general characteristics
|
Inspection Method
|
Value
|
Product data (Catalyzed A+B)
|
YJS-525
|
|
Hardness
|
Shore A
|
25±2
|
Mix Ratio
|
A:B
|
100:2
|
Color
|
/
|
White
|
Pot life
|
25 °C (77F)
|
30-40mins
|
Curing time
|
25 °C (77F)
|
3-4 hours
|
Mixed viscosity
|
mPa.s
|
25000±2000
|
Tear-strength
|
kg/cm
|
25±2
|
Tensile-strength
|
M.pa
|
≥3.8
|
Elongation
|
%
|
≥460%
|
Shrinkage
|
%
|
≤0.2%
|
Note: This is a 100A:2B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
3. FEATURES
1.Low viscosity
2.great flexibility
3.Extra low shrinkage
4.Chemical resistance
5.release properties
6.Easy to work with
4.High tear strength
5.Heat Resistance
6.various color is available
7.High reproduction rate
1.Low viscosity
2.great flexibility
3.Extra low shrinkage
4.Chemical resistance
5.release properties
6.Easy to work with
4.High tear strength
5.Heat Resistance
6.various color is available
7.High reproduction rate
4.Appearance
Part A: Silicone rubber is a white liquid
Part B: Catalyst is a non-toxic and odorless liquid, white transparent color.
ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season.
Part A: Silicone rubber is a white liquid
Part B: Catalyst is a non-toxic and odorless liquid, white transparent color.
ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season.
5.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-5 series Silicone Base and its Curing Agents have a usable life of 12 months.
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-5 series Silicone Base and its Curing Agents have a usable life of 12 months.
6.Package
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle
Contact Us
E-mail: info@sz1j3.com
Tel: +86-0755-85200989
Mobile/WhatsApp: +86 13823512713
Skype: live:gcsilicone1
Address: No. 25, Baolong 1st Road, Nanyue Community, Baolong Street, Longgang District, Shenzhen,china