NP25 rtv liquid silicone rubber for polyurethane casting
Category: polyurethane casting silicone  Publish Time: 2018-08-07 11:08 
NP25 are good for polyurethane molding. With low shrinkage and excellent tension and tear strength, they are great for replicating complex pattern design of polyester, expandable polyurethane foam, solid polyurethane furniture.

1.Description

according to NP25 is a kind of room temperature vulcanized silicone rubber in condensation type. It is generally named as RTV2 silicone rubber. Part A is silicone base, Part B is the catalyst or curing agent. It is special used to make molds for PU or polyurethane casting.

2. Technical Datasheet
Typical general characteristics
Inspection Method
Value
Product data (Catalyzed A+B)
NP25
Hardness
Shore A
25±2
Mix Ratio
A:B
100:2
Color
/
White
Pot life
25 °C (77F)
30-40mins
Curing time
25 °C (77F)
36 hours
Mixed viscosity
mPa.s
15000±1000
Tear-strength
kg/cm
26±2
Tensile-strength
M.pa
≥3.8
Elongation
%
 ≥550%
Shrinkage
%
≤0.2
Note: This is a 100A:2B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.

3. FEATURES
1.Low viscosity
2.great flexibility
3.Extra low shrinkage
4.Excellent PU, Resin Chemical resistance
5.release properties
6.Easy to work with
4.High tear strength
5.Heat Resistance
6.various color is available
7.High reproduction rate

4.Appearance
Part A: Silicone rubber is a white liquid
Part B: Catalyst is a non-toxic and odorless liquid, white transparent color.
ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season.

5.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, YJS-P series Silicone Base and its Curing Agents have a usable life of 12 months.

6.Package
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle


  Next: YJS-525 liquid mould making silicone rubber for photo frame
 
QQ  Shirley Wu
Skype